Custom Fasteners
Automatic Lathe
Copper CNC machining looks simple until the first chips start wrapping around the tool. Copper is soft, ductile and an excellent conductor of heat, so it behaves very differently from steel or aluminum on the machine. This guide explains which tools to choose, which cutting parameters to start from, and how to avoid the problems […]
This guide walks through the copper CNC machining process, from selecting raw material and programming toolpaths to cutting strategies and final inspection, so buyers can plan better copper parts.
A practical breakdown of CNC milling cost drivers—from material and tooling to cycle time—paired with proven strategies to lower machining expenses.
A: For most CNC machined parts, we typically achieve tolerances of ±0.01–0.02 mm, depending on material, geometry, and process. For critical features, tighter tolerances may be possible after reviewing your drawings and requirements.
A: We machine a wide range of materials, including:Metals: Aluminum, stainless steel, carbon steel, alloy steel, brass, copper, titanium, etc.Plastics: POM, PEEK, PC, ABS, Nylon, PTFE, PMMA, and others.If you have a special material, send us your specs and we will evaluate feasibility.
A: Prototypes & small batches: usually 7–15 days after order confirmation.Mass production: lead time depends on quantity and part complexity, normally 3–6 weeks.Urgent projects can be discussed case by case.
A: Yes. We offer a variety of surface treatments, such as:Anodizing (Type II / Type III)Plating (zinc, nickel, chrome, etc.)Powder coating & painting Sandblasting, brushing, polishing Heat treatment and hardening We can also follow your specified standard or color code.
A: Yes. Our engineering team can review your 3D/2D drawings and provide DFM suggestions to improve machinability, reduce costs, and enhance performance, while keeping your functional requirements and critical dimensions.
A: We implement strict quality control throughout the whole process, including: Incoming material inspection In-process inspection during machining Final inspection with calipers, micrometers, CMM, optical projector, etc. Upon request, we can also perform film thickness tests, salt spray tests, and provide full inspection reports.
A: We are very flexible with quantities. There is no strict MOQ – we can support single prototypes, small batches, and high-volume production. Our goal is to grow with our customers from the prototype stage to mass production.
